White 1kg Production Pack
Convenient 1kg packaging for product testing, daily production, stock control and repeat ordering.
MajuJet T-Shirt DTF Hot Melt Powder 1kg Malaysia
Create dependable textile DTF transfers with a controlled adhesive-powder workflow. MajuJet white hot-melt powder is applied to wet DTF ink, thermally melted and then heat-pressed to bond the printed graphic to a compatible fabric.
White Hot-Melt Powder
1kg Pack
Textile DTF Workflow
Manual or Automatic Powdering
Heat-Cured Adhesive
Garment Transfer Production
Available from Scanext Solution Sdn Bhd in Ara Damansara, Petaling Jaya—near Kelana Jaya, Kota Damansara, Glenmarie, Sungai Buloh, Bandar Utama, Shah Alam, Subang, Puchong and Kuala Lumpur. Supply is available throughout West Malaysia, Sabah and Sarawak.
Reliable Adhesive Bond for Textile DTF Transfer Production
Hot-melt powder is the adhesive layer in the textile DTF process. It attaches to the wet printed ink on PET film, melts during controlled curing and bonds the finished transfer to fabric during heat pressing.
Powder Coverage on Wet Ink
Designed for application over compatible wet textile DTF ink so adhesive remains mainly on the printed image after excess powder is removed.
Controlled Thermal Melting
The powder is heated until correctly fused before transfer. Oven temperature, dwell time and airflow must suit the actual powder and production system.
Fabric-Bonding Function
After heat pressing, the melted adhesive helps anchor the printed colour and white layers to a compatible garment or textile surface.
Flexible Finished Transfer
A correctly matched system can produce flexible garment decoration with useful stretch, wash and everyday abrasion resistance.
Manual or Shaker Workflow
Suitable for testing with controlled manual powdering or commercial production using a compatible powder shaker and curing unit.
Confirm Powder Chemistry, Particle Grade, Melting Range and Fabric
| Brand | MajuJet |
|---|---|
| Product | Textile DTF hot-melt adhesive powder |
| Colour | White |
| Pack Weight | 1kg |
| Function | Forms the heat-activated adhesive layer between the cured DTF print and compatible fabric |
| Suitable System | Compatible textile DTF film, pigment ink, printer, powdering method, curing equipment and heat press |
| Application Method | Apply to wet printed ink, remove excess powder, thermally melt or cure, then heat-press the transfer to fabric |
| Powder Equipment | Controlled manual application or compatible automatic powder shaker and recovery system |
| Typical Fabrics | Tested cotton, polyester, cotton-polyester blends, canvas, denim and selected compatible textiles |
| Cutting | Not applicable to loose powder. Textile DTF transfers normally require no contour cutting or weeding; gang sheets may be trimmed for packing |
| Finished Performance | Potential for flexible, washable and abrasion-resistant decoration when the entire DTF system is correctly matched and processed |
| Storage | Keep sealed, dry and protected from heat, moisture and contamination; follow the supplier label and safety data sheet |
| Safety | Avoid generating or inhaling airborne dust. Use handling controls, ventilation and personal protective equipment specified in the current safety data sheet |
| Supply Coverage | Petaling Jaya self-pickup and delivery throughout West and East Malaysia |
Compatibility certainty: Do not publish an exact chemistry, mesh or particle size, melting temperature, curing temperature or press setting until confirmed on the current product label or technical data sheet. Test MajuJet powder with your actual DTF ink, film, curing equipment, heat press and garment before volume production.
Reduce Powder Contamination, Incomplete Melting and Weak Bonding
Powder Sticks Outside the Design
Excess moisture, static, ink overspray or inadequate shaking can leave adhesive around the artwork.
Solution: Control humidity and ink limits, then improve powder distribution, shaking and recovery.Uneven Coverage or Pinholes
Insufficient powder contact, clumps or inconsistent shaking may leave weak areas in the adhesive layer.
Solution: Sieve compatible powder where permitted and standardise coating, dwell and excess-powder removal.Powder Does Not Melt Evenly
Incorrect temperature, airflow, dwell time or equipment calibration can cause a dry, grainy or partially fused surface.
Solution: Verify the powder specification and calibrate the oven or shaker using a controlled production test.Transfer Lifts After Washing
Under-curing, inadequate powder coverage, incorrect pressing or incompatible fabric can weaken adhesion.
Solution: Correct the total curing and pressing workflow, then complete stretch and wash testing.Print Feels Brittle or Cracks
Excess powder, overheating, heavy ink layers or an unsuitable adhesive grade may reduce flexibility.
Solution: Optimise ink load, powder amount, curing, press pressure and fabric compatibility.Powder Clumps During Storage
Humidity, heat, open packaging or contamination can change powder flow and coverage.
Solution: Reseal immediately, store dry and clean, and follow the shelf-life and storage guidance on the current pack.
Built for DTF Print Shops, Apparel Brands and Garment Producers
MajuJet white DTF powder is intended for businesses operating a compatible textile DTF workflow with PET film, pigment ink, powder application, curing and heat-press equipment.
DTF Printing Businesses
Produce roll transfers, gang sheets and ready-to-press graphics for customers, agents and commercial apparel buyers.
T-Shirt & Uniform Printers
Bond custom graphics onto tested T-shirts, polo shirts, uniforms, workwear and event apparel.
Fashion & Clothing Brands
Create chest graphics, back prints, sleeve marks, neck labels and limited-edition merchandise.
Corporate Gift Suppliers
Decorate compatible tote bags, caps, aprons, pouches and promotional textile products.
E-Commerce & Home Businesses
Offer personalised garments and ready-to-press DTF transfer packs with a scalable production workflow.
Commercial Production Factories
Use repeatable powdering and curing controls for higher-volume garment-transfer production.
Bond DTF Graphics to T-Shirts, Uniforms and Fabric Accessories
T-Shirts & Polo Shirts
Produce vivid logos, photos and personalised graphics on tested light or dark garments.
- Full-colour artwork with white backing
- Useful for short runs and repeat orders
- No vinyl weeding around detailed designs
Hoodies, Jackets & Sweatshirts
Create fashion graphics, club artwork and promotional branding on compatible cotton, polyester and blended garments.
- Supports detailed artwork
- Useful for variable designs
- Test texture and heat tolerance
Sportswear & Jerseys
Add sponsor logos, names, numbers and team graphics to tested performance fabrics.
- Strong visual impact
- Flexible production quantities
- Dye-migration testing is essential
Uniforms, Workwear & Aprons
Apply company logos, staff names and department identification to compatible work garments.
- Repeatable business branding
- Suitable for different garment colours
- Wash-test before rollout
Canvas Bags & Textile Accessories
Decorate tested tote bags, pouches, selected caps and fabric promotional products.
- Supports gradients and fine details
- Useful for custom-gift production
- Press fixtures may be required
Labels & Ready-to-Press Transfers
Produce neck labels, small logos, sleeve marks and transfer packs for clothing brands and resellers.
- Efficient gang-sheet production
- Personalisation and versioning
- Low setup when designs change
Print, Powder, Shake, Cure and Heat Press With Controlled Settings
Print DTF Film
Print mirrored colour and white ink onto the correct side of compatible PET film.
Apply Powder
Cover the wet printed ink evenly with compatible MajuJet hot-melt powder.
Shake & Recover
Remove loose excess powder and prevent contamination around the design.
Melt & Cure
Use the confirmed temperature, dwell and airflow until the adhesive is properly fused.
Press & Test
Heat-press to the garment, peel as specified and complete stretch and wash testing.
Powder Control
Standardise powder coverage, shaking, recovery, humidity and housekeeping to reduce halos, clumps and inconsistent bonding.
Fabric & Wash Testing
Test adhesion, stretch, hand feel, dye migration and washing on the actual garment before approving bulk production.
User Training & Demo
Arrange guidance on powder application, shaker settings, curing, press setup, testing, safe handling, cleaning and storage.
Used in Malaysian Textile DTF Production
According to the supplied information, MajuJet DTF consumables are used in Printlab Marketing Sdn Bhd production. Printlab publicly offers textile DTF applications for T-shirts, hoodies, uniforms, sportswear, tote bags, caps and other compatible textile products.
Application certainty: Hot-melt powder performance depends on the complete DTF system. Film coating, ink load, white density, powder grade, curing, heat-press accuracy, garment dye and washing conditions all affect the result. Waterproof-coated, silicone-treated, heat-sensitive, highly elastic or sublimated fabrics require specific testing.
Choose a Test, Production or Repeat-Supply DTF Powder Package
Current stock, technical grade, particle range, melting range, batch details and package pricing should be confirmed during quotation. Test the powder with your own ink, film, curing equipment, heat press and garments before volume production.
1kg Test Pack
For checking powder flow, wet-ink coverage, curing, peeling, fabric adhesion, flexibility and wash performance.
Multi-Pack Production Bundle
Multiple 1kg packs for DTF print shops, uniform printers and apparel businesses with regular production.
Dealer & Reseller Enquiry
Share monthly powder consumption, workflow, preferred packing and delivery destination for recurring-supply discussion.
Ready-Stock Check
WhatsApp the PJ team to confirm availability of MajuJet white DTF hot-melt powder in 1kg packs.
Own Warehouse & Factory Support
Local warehouse support assists stock coordination, repeat-order planning and Ara Damansara self-pickup.
West & East Malaysia Delivery
Delivery is available throughout Peninsular Malaysia, Sabah and Sarawak, subject to current courier and material-shipping requirements.
Send Complete DTF Workflow Details for a Faster, More Accurate Quote
Send Details
Provide ink, film, powdering, curing, press and garment information.
Compatibility Check
We review powder requirement, workflow and available technical information.
Stock & Quote
We confirm current batch, availability, package quantity and price.
Approve Order
Confirm quotation, payment and self-pickup or delivery arrangement.
Pickup or Dispatch
Collect in Petaling Jaya or arrange nationwide shipping.
Fast Quote Checklist
- Company or customer name
- DTF printer brand and model
- DTF ink brand and colour configuration
- DTF film brand and peel method
- Current powder brand or grade
- Required quantity in 1kg packs
- Manual or automatic powdering
- Powder shaker or oven model
- Current curing temperature and dwell
- Heat-press model and platen size
- Current press time, temperature and pressure
- Typical garment and fabric type
- Problem to solve, if any
- Delivery postcode and state
- Required delivery date
Self-pickup: N-G-42, Jalan PJU 1A/1, Ara Damansara, 47301 Petaling Jaya, Selangor. Confirm stock and collection time before travelling.
Local DTF Powder Supply With Showroom and Technical Guidance
Product Consultant & Compatibility Advice
Our team helps review DTF ink, film, powdering, curing equipment, heat press, garment application and production problems.
Showroom Demo & Samples
Arrange a Petaling Jaya appointment to discuss powder application, curing, pressing and wash-testing procedures.
Commercial Production Reference
The supplied information states that MajuJet DTF consumables are used by Printlab Marketing Sdn Bhd, which publicly offers textile DTF production.
Authorised Brand Portfolio
Scanext supplies and supports selected Canon, HP, Epson, Fujifilm and Ricoh products. Authorisation scope varies by product category.
Own Warehouse & Six Branches
Regional presence in Kuala Lumpur, Petaling Jaya, Penang, Kuantan, Kota Bharu and Kuala Terengganu supports customer coordination.
Own On-Site Service Engineers
Ask about technical guidance and on-site engineering support for supported equipment, subject to machine, location, service scope and scheduling.
What is MajuJet DTF hot-melt powder?
It is a white heat-activated adhesive powder used in textile DTF production. It coats wet printed ink on PET film, melts during controlled curing and bonds the graphic to compatible fabric during heat pressing.
What is the pack size and colour?
The specified product is supplied as white DTF hot-melt powder in a 1kg pack, subject to current stock and batch confirmation.
Can it be used with any DTF printer?
The powder does not enter the printer. It must be compatible with the complete textile DTF system, including the ink, PET film, powdering method, curing equipment, heat press and target fabric.
What is the powder made from?
Confirm the exact polymer chemistry, particle range, melting range and safety information from the current MajuJet technical data sheet or safety data sheet. Do not assume a specification from another powder brand.
How is DTF powder applied?
Apply it evenly while the printed ink is still wet, remove loose excess powder, thermally melt or cure the adhesive, and then heat-press the finished transfer to a tested garment.
Does DTF powder require kiss cutting or die cutting?
No. Cutting is not a property of loose powder. Textile DTF graphics normally transfer without contour cutting or weeding, although gang sheets may be trimmed into individual transfers.
Which fabrics are suitable?
DTF is commonly used on tested cotton, polyester, blends, canvas, denim and selected textiles. Waterproof-coated, silicone-treated, sublimated, highly elastic or heat-sensitive fabrics require additional testing.
Will the finished transfer resist washing and abrasion?
A correctly matched and processed DTF transfer can resist normal washing, stretching and everyday abrasion. Results depend on ink, film, powder, curing, pressing, garment surface and washing method.
How should the powder be stored and handled?
Keep it sealed, dry and protected from heat, humidity and contamination. Avoid creating or inhaling airborne dust and follow the current product label and safety data sheet for ventilation, protective equipment and disposal.
Can I self-pick up or request nationwide delivery?
Yes. Arrange self-pickup in Ara Damansara, Petaling Jaya, or request delivery throughout West Malaysia, Sabah or Sarawak. Confirm stock, courier acceptance, freight and lead time first.
Need the Correct MajuJet DTF Powder for Your Workflow?
WhatsApp your ink, film, powdering method, curing equipment, heat-press settings, garment type, required quantity and delivery postcode for compatibility checking and a fast quotation—or arrange a showroom visit.
Scanext Solution Sdn BhdN-G-42, Jalan PJU 1A/1, Ara Damansara, 47301 Petaling Jaya, Selangor
WhatsApp: 011-10867868