Detailed Full-Colour Output
A smooth, compatible ink-receptive surface supports fine text, gradients, photographs and multi-colour artwork when printer, ink and RIP settings are correctly profiled.
MajuJet T-Shirt DTF PET Transfer Film Malaysia – 300mm & 600mm Rolls
Produce vivid, detailed garment transfers with MajuJet textile DTF film—an ink-receptive PET carrier for compatible DTF pigment ink, hot-melt powder, curing and heat-press production.
Textile DTF PET Film
300mm • 600mm
100 Metres
3-Inch Core
CMYK + White
Hot-Melt Powder Workflow
Heat-Press Transfer
Available from Scanext Solution Sdn Bhd in Ara Damansara, Petaling Jaya—near Kelana Jaya, Kota Damansara, Glenmarie, Sungai Buloh, Bandar Utama, Shah Alam, Subang, Puchong and Kuala Lumpur. Supply is available throughout West Malaysia, Sabah and Sarawak.
Reliable PET Transfer Film for Colour, White Ink and Hot-Melt Powder
MajuJet T-shirt DTF film serves as the temporary printing and transfer carrier in a textile DTF workflow. The compatible printer lays down mirrored colour and white ink, hot-melt powder bonds to the wet ink, and the cured transfer is applied to a garment with controlled heat and pressure.
White-Ink Support
Designed for textile DTF systems using colour plus white pigment ink, helping graphics remain opaque on both light and dark garments.
Powder Acceptance
The printed film carries wet ink through hot-melt powder application, shaking and curing before the transfer is pressed onto fabric.
Versatile Garment Decoration
Suitable for tested cotton, polyester, blends, canvas, denim and selected textile products using compatible film, powder and press conditions.
No Weeding Around Every Design
DTF transfers normally move only the printed and powdered artwork, reducing contour-cutting and vinyl-weeding work. Gang sheets may still be trimmed into separate transfers.
Production Roll Options
Choose 300mm for compact production or 600mm for wider workflows, supplied as 100-metre rolls with a 3-inch core.
Confirm Film Width, Coating, Peel Type and Printer Configuration
| Brand | MajuJet |
|---|---|
| Product Type | Textile Direct-to-Film PET transfer film |
| Width Options | 300mm and 600mm |
| Roll Length | 100 metres |
| Core Size | 3 inch |
| Suitable Printer | Compatible textile DTF printer supporting the selected media width, roll diameter and winding configuration |
| Ink System | Compatible water-based textile DTF pigment ink, normally CMYK plus white; not UV DTF ink |
| Adhesive Process | Compatible DTF hot-melt adhesive powder followed by controlled curing |
| Transfer Equipment | Heat press with suitable time, temperature and pressure control |
| Peel Method | Confirm whether the current film batch is hot, warm or cold peel before production |
| Film Coating | Confirm printable side and whether the supplied construction is single-side or double-side coated |
| Typical Fabrics | Tested cotton, polyester, cotton-polyester blends, canvas, denim and selected compatible textiles |
| Cutting | Contour cutting and weeding are normally unnecessary; finished gang sheets may be trimmed or separated for packing and application |
| Finished Performance | Potential for flexible, washable and abrasion-resistant decoration when the total ink, powder, curing and pressing system is correctly matched |
| Supply Coverage | Petaling Jaya self-pickup and delivery throughout West and East Malaysia |
Compatibility certainty: Before ordering, send your printer model, usable media width, print-side orientation, winding direction, maximum roll diameter, core requirement, ink brand, powder type, shaker or oven model, heat press and target fabrics. Confirm the current MajuJet film peel method and approve a wash-tested production sample.
Reduce Ink Pooling, Powder Contamination, Curling and Peel Failure
Ink Beads or Pools on the Film
An incompatible coating, wrong print side, excessive ink load or unsuitable humidity can reduce image quality.
Solution: Confirm the printable side and test ink limits, white density, platen gap and environmental conditions.Powder Sticks Outside the Artwork
Excess moisture, static, insufficient shaking or heavy ink overspray can leave unwanted adhesive.
Solution: Control humidity, powder grade, shaking, curing and artwork cleanliness before pressing.Film Curls or Tracks Poorly
Incorrect tension, storage, heat exposure or a roll outside equipment limits can interrupt production.
Solution: Match width, core, roll diameter and winding to the printer, then store film sealed, flat and away from heat or moisture.Transfer Does Not Release Cleanly
Peeling at the wrong temperature or using mismatched film, powder and pressing conditions can lift fine details.
Solution: Confirm hot, warm or cold peel instructions and standardise press temperature, time, pressure and peeling motion.Print Cracks or Washes Off
Under-curing, insufficient powder, incorrect pressing or an unsuitable fabric can weaken bonding.
Solution: Run stretch and wash tests, then correct powder coverage, curing and press settings before bulk production.Colour Changes on Polyester
Dye migration from sublimated or deeply coloured polyester can contaminate light-coloured DTF graphics.
Solution: Test the garment and use a compatible low-bleed workflow or migration-blocking system where required.
Built for DTF Print Shops, Apparel Brands and Merchandise Producers
This PET transfer film is intended for businesses producing custom garment graphics with a compatible textile DTF printer, powder application and curing equipment, and a controlled heat-press workflow.
DTF Printing Businesses
Produce roll-based transfers, gang sheets and ready-to-press graphics for walk-in customers, agents and commercial buyers.
T-Shirt & Uniform Printers
Decorate corporate uniforms, event shirts, teamwear, workwear and personalised apparel in small or repeat quantities.
Fashion & Clothing Brands
Create full-colour chest graphics, back prints, sleeve artwork, inside labels and limited-edition merchandise.
Corporate Gift Suppliers
Add customer logos and campaign graphics to compatible fabric bags, caps, aprons and promotional textiles.
E-Commerce & Home Businesses
Offer personalised apparel and made-to-order merchandise without preparing a separate screen for every design.
Commercial Production Factories
Use roll film in repeat workflows where stable printing, powdering, curing, pressing and quality control are essential.
Decorate T-Shirts, Hoodies, Uniforms and Fabric Accessories
T-Shirts & Polo Shirts
Produce vivid logos, artwork, photos and personalised graphics on tested light or dark garments.
- Full-colour and white-ink designs
- Suitable for short runs and repeat orders
- No vinyl weeding around detailed artwork
Hoodies, Jackets & Sweatshirts
Add fashion graphics, team branding and promotional designs to compatible cotton, polyester or blended garments.
- Works with complex artwork
- Useful for variable names and designs
- Test seams, texture and heat tolerance
Sportswear & Jerseys
Create sponsor logos, numbers and team graphics on tested performance fabrics and selected polyester garments.
- Strong colour impact
- Flexible production quantities
- Migration testing is essential
Uniforms, Workwear & Aprons
Brand company clothing with logos, department names, safety identification and staff personalisation.
- Professional repeat branding
- Useful for different garment colours
- Wash-test before rollout
Canvas Bags & Textile Accessories
Decorate compatible tote bags, pouches, fabric panels, selected caps and promotional textile products.
- Supports fine details and gradients
- Suitable for custom gift production
- Press fixtures may be needed
Fashion Labels & Merchandise
Create neck labels, sleeve marks, small logos and limited-edition graphics for clothing lines and reseller packs.
- Efficient gang-sheet production
- Personalisation and versioning
- Low setup for changing designs
Print, Powder, Cure, Heat Press and Peel With a Controlled Workflow
Print on Film
Load the correct film side and print the mirrored colour and white layers.
Apply Powder
Coat the wet ink evenly with compatible hot-melt adhesive powder.
Shake & Cure
Remove excess powder and cure the adhesive using controlled heat and dwell time.
Heat Press
Pre-press the garment, position the transfer and apply the tested temperature, time and pressure.
Peel & Finish
Peel at the specified temperature and post-press when required by the tested system.
Artwork & Gang Sheets
Use transparent-background artwork, adequate resolution and suitable spacing. Gang sheets can improve material utilisation and may be manually trimmed into individual transfers.
Fabric & Wash Testing
Test colour, stretch, hand feel, adhesion, dye migration and washing on the actual garment before approving bulk production.
User Training & Demo
Arrange guidance on film loading, white ink, powder control, curing, press setup, peeling, troubleshooting, maintenance and storage.
Used in Malaysian T-Shirt DTF Production
According to the supplied information, MajuJet DTF film is used in Printlab Marketing Sdn Bhd production. Printlab publicly offers textile DTF printing for T-shirts, hoodies, uniforms, sportswear, tote bags, caps and other compatible fabric products.
Application certainty: DTF results depend on the complete system—not the film alone. Ink, white density, powder, curing, heat-press accuracy, garment coating, fabric dye and washing conditions affect the outcome. Waterproof-coated fabric, silicone finishes, highly elastic materials, sublimated polyester and heat-sensitive textiles require specific testing.
Choose a Test, Production or Repeat-Supply DTF Film Package
Current stock, coating construction, peel method, winding direction and package pricing should be confirmed during quotation. Test the film with your own ink, powder, curing equipment, heat press and garments before volume production.
Film Test Package
A practical starting option for checking print quality, powder acceptance, curing, peeling, stretch, wash durability and fabric compatibility.
Multi-Roll Production Package
For DTF shops, apparel printers and merchandise suppliers with regular custom-garment production.
Dealer & Reseller Enquiry
Share your monthly film usage, preferred width, production setup and delivery destination for recurring-supply discussion.
Ready-Stock Check
WhatsApp the PJ team to confirm availability of 300mm and 600mm × 100m MajuJet DTF film rolls.
Own Warehouse & Factory Support
Local warehouse support assists stock coordination, repeat-order planning and Ara Damansara self-pickup.
West & East Malaysia Delivery
Delivery is available throughout Peninsular Malaysia, Sabah and Sarawak. Freight and lead time depend on quantity and postcode.
Send Complete Equipment Details for a Faster, More Accurate Quote
Send Details
Provide printer, film width, ink, powder, curing and press information.
Compatibility Check
We review width, core, winding, coating, peel method and equipment limits.
Stock & Quote
We confirm current film specification, availability, package and price.
Approve Order
Confirm quotation, payment and self-pickup or delivery arrangement.
Pickup or Dispatch
Collect in Petaling Jaya or arrange nationwide shipping.
Fast Quote Checklist
- Company or customer name
- Textile DTF printer brand and model
- Usable print width
- Required width: 300mm or 600mm
- Required quantity
- Confirmation of 3-inch core support
- Maximum roll diameter and weight
- Required winding direction
- Current film peel method
- DTF ink brand and colour configuration
- Hot-melt powder type
- Shaker, oven or curing equipment
- Heat-press model
- Typical garment and fabric type
- Delivery postcode and state
- Required delivery date
Self-pickup: N-G-42, Jalan PJU 1A/1, Ara Damansara, 47301 Petaling Jaya, Selangor. Confirm stock and collection time before travelling.
Local DTF Film Supply With Showroom and Technical Guidance
Product Consultant & Compatibility Advice
Our team helps review printer width, core, winding, film coating, ink, powder, curing equipment, heat press and garment application.
Showroom Demo & Samples
Arrange a Petaling Jaya appointment to review available samples and discuss printing, curing, pressing and wash-testing procedures.
Commercial Production Reference
The supplied information states that MajuJet DTF film is used by Printlab Marketing Sdn Bhd, which publicly offers textile DTF production.
Authorised Brand Portfolio
Scanext supplies and supports selected Canon, HP, Epson, Fujifilm and Ricoh products. Authorisation scope varies by product category.
Own Warehouse & Six Branches
Regional presence in Kuala Lumpur, Petaling Jaya, Penang, Kuantan, Kota Bharu and Kuala Terengganu supports customer coordination.
Own On-Site Service Engineers
Ask about technical guidance and on-site engineering support for supported equipment, subject to machine, location, service scope and scheduling.
What is MajuJet T-shirt DTF film?
It is a PET carrier film used in compatible textile Direct-to-Film production. Mirrored colour and white ink are printed onto the coated side, hot-melt powder is applied and cured, and the finished graphic is heat-pressed onto a compatible garment.
What sizes are available?
The specified roll widths are 300mm and 600mm. Each roll is 100 metres long with a 3-inch core, subject to current stock confirmation.
Can I use the film in a Crystal UV DTF printer?
No. This corrected product page is for textile DTF film using compatible water-based DTF pigment ink, hot-melt powder and heat pressing. Crystal UV DTF machines use UV ink and A/B films for hard-surface transfers.
What ink and powder should I use?
Use compatible textile DTF pigment ink—normally CMYK plus white—and a hot-melt adhesive powder matched to the ink, film, fabric and curing workflow. Test the complete system before production.
Is the film hot peel or cold peel?
The current product construction and batch must be confirmed before publishing or production. Follow the supplied hot, warm or cold-peel instruction and do not assume one peeling method.
Which fabrics are suitable?
DTF is commonly used on tested cotton, polyester, blends, canvas, denim and selected textile products. Heat-sensitive, waterproof-coated, silicone-treated, sublimated or highly elastic fabrics require additional testing.
Is kiss cutting or die cutting required?
Normally no. Textile DTF transfers generally do not require contour cutting or weeding around each graphic. Printed gang sheets may still be trimmed into individual transfers for packing or application.
Are DTF transfers washable and scratch-resistant?
A correctly matched and processed DTF transfer can resist normal washing, stretching and everyday abrasion. Performance depends on ink, powder, curing, pressing, garment surface and washing method, so wash-test the actual garment.
Do you provide consultation, demo or user training?
Yes. Contact Scanext to arrange advice or an appointment covering film loading, printing, powder application, curing, pressing, peeling, testing, maintenance and troubleshooting.
Can I self-pick up or request nationwide delivery?
Yes. Arrange self-pickup in Ara Damansara, Petaling Jaya, or request delivery throughout West Malaysia, Sabah or Sarawak. Confirm stock, freight and lead time first.
Need the Correct MajuJet DTF Film for Your Printer?
WhatsApp your printer model, usable width, ink and powder brands, curing equipment, peel requirement, garment type, quantity and delivery postcode for compatibility checking and a fast quotation—or arrange a showroom visit.
Scanext Solution Sdn BhdN-G-42, Jalan PJU 1A/1, Ara Damansara, 47301 Petaling Jaya, Selangor
WhatsApp: 011-10867868